- HP and Torque: 300 HP / 330 FT LBS
- Compression Ratio: 9.0:1
- Cast Iron Heads
- Hydraulic Roller Cam
- Cast Steel Crank
- Hypereutectic Pistons
Block:
- Hand picked seasoned block
- Square and parallel decked
- Align honed main bearing bore
- Cylinders honed on computer controlled machine to within .0002 straightness and roundness
- Cylinders are sonic tested for thickness
- 2-Bolt Main
- 4.000″ Bored .060″ Over
- 1-Piece Rear Main Seal
- Mech fuel pump provision: Yes
Rotating Assembly:
- Ford, machined and balanced by BluePrint Engines
- 3.000″ Stroke
- OEM type 5.090″ connecting rods
- Hypereutectic pistons
- 50oz External balance
Cylinder Heads:
- Cast Iron
- Hardened retainers and springs
- 1.94 swirl polished intake valves
- 1.60 swirl polished exhaust valves
Cam Specs:
- Cam Type: Roller
- .543 Intake .554 Exhaust
- 218 Intake / 226 Exhaust duration @ .050
- 112 degrees lobe separation
Ignition Timing
- 34 degreess Total at 3500 RPM
Notes
- Not for use in pollution controlled vehicles
- Engine timing cover is designed for standard rotation water pump ONLY
Warranty
Click here for warranty information
Specifications
RECOMMENDATIONS
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
- Part Number: BP3024CTC
- Fuel Delivery Type: Carburated
- Spark Plug: Champion 406
- Spark Plug Gap: .040″
- Harmonic Balancer: BPP50 – 50 Ounce, 6.4″ Diameter
- Flexplate/Flywheel: 50oz Externally balanced
- Stall Converter: 1800-2200
- Intake Manifold: Dual plane satin aluminium
- Fuel Recommendation: 87 Octane
- Timing (Initial/Total Advance): Initial timing – 12° and Total timing 32°
- Firing Order: 1,3,7,2,6,5,4,8
- Recommended Break in Oil: BPP710
- Recommended Service Oil: BPP10W30
- Recommended Oil Filter: BPP51515
- Total Oil capacity with production oil pan, and Correct BPP51515 Filter: 5 Quarts
Reviews
There are no reviews yet.